QUAD 4 x4 Your 4x4 Experts!
23 Turner Rd., Roberts, Montana 59070
 CALL  406-446-2427 • Order 24 hours a day.  7 days a week.

MAIN PAGE INDEX

Dan the Gear Man

U.S.A. Made Apparel

Montana Beartooth Mountain Country

 Special Service Tools for Your Chevy and GMC Vehicles

Maintain and repair your Chevy/GMC vehicle with the right tool for the job.  Whether you are a shade tree mechanic or a top notch professional automotive technician, you will find our ever expanding selection of 4x4 service tools has the hard to find tools you need to keep your GM SUV or truck in peak operating condition!   For general service tools or tools to service a competitive  brand of 4x4's, click on the appropriate link above.  To browse our selection of special tools for GM NV4500 transmissions go to:  NV4500 Tools

See Our What's New Web Page

WHEEL BEARING & SEAL TOOLS

(l)Pro Duty (r)Standard Duty
Seal Installers

Installer #-- National Seal #
QT1504--471271
QT1506--416273
QT1507--442380
QT1509--2081

Installer#--CR Seal #
QT1505--27471

Wheel Seal Installers  Quit wrecking those wheel seals with a hammer!  QuadTool™ Standard & Pro Duty Wheel Seal Installers are precision machined for specific wheel seal applications.  Use our inexpensive high impact plastic Standard Duty installers for  occasional use.  Choose our aluminum Pro Duty installers for frequent seal installation.  Standard Duty installers can be hit directly with a hammer or attached to a driver handle.  Pro Duty installers must be used with a driver handle.  Order Seal Installers from our 4x4 Tools Page. Also available from 4x4tools.com

Front Wheel Standard Duty Seal Installer Applications:
QT1504 73-91 K5, ½ ton, 77½-86 ¾ ton
QT1505 1977-91 K30, K/V3500
QT1506 1960-1977 K20
QT1507 60-72 K5 Blazer/Jimmy, K10

Rear Wheel Seal Standard Duty Seal Installer Applications:
QT1509 73-02 ¾ &1 ton w/full float axle

 

Bearing Cup Installer

Timken Cup#--Installer#
354A--QT1814
362A--QT1805
382A--QT1804
453X--QT1809
2720--QT1818
3920--QT1807
02822--QT1812
11520--QT1819
14276--QT1810
15245--QT1811
18620--QT1821
23256--QT1813
25821--QT1812
28622--QT1800
31520--QT1818
39520--QT1807
45220--QT1806
M88010--QT1820
HM88510--QT1812
HM88610--QT1815
HM89410--QT1818
LM102910--QT1802
JLM104910--QT1801
LM104911--QT1801
NP434567--QT1822
LM501310--QT1802
JLM506810--QT1808
LM603011--QT1803
M802011--QT1823
HM804810--QT1816
NP882000--QT1817
HM903210--QT1816

Bearing Cup Installers  Install those critically important and expensive bearing cups without damaging the precision machined bearing surfaces.  Faster, safer, and easier than using a punch.  Use in combination with one of our Driver Handles. Order Cup Installers from our Bearing Cup Installer Page. Also available fro 4x4tools.com

Front Inner Wheel Bearing Cup Installer Applications:
QT1801 77½-86  Blazer/Jimmy, K10/20 87-91 ½T
QT1803 1958-77 Blazer/Jimmy, K10
QT1805 1960-1977 K20
QT1804 1977-91 K30 K/V3500

Front Outer Wheel Bearing Cup Installer Applications:
QT1802 58-91 Blazer/Jimmy, K-10/20, 87-91 K/V1500
QT1801 1977-91 K30 K/V3500
 
Rear Inner Wheel Bearing Cup Installer Applications
QT1804 73-02 ¾ & 1 T. w/full float rear axle

Front Axle Inner Pinion Bearing Cup Installers
QT1818 1960-1980 Blazer, ½ ton, ¾ ton  with Dana 44 front axle
QT1823 1977-up  Blazer, ½ ton, ¾ ton with GM 8.25 and 8.5" axles
QT1805 1977-1991 1 Ton with Dana 60 solid front drive axle.

Front Axle Outer Pinion Bearing Cup Installers
QT1812 1960-1980 Blazer, ½ ton, ¾ ton  with Dana 44 front axle
QT1805 1977-91 1 ton with Dana 60

Rear Axle Inner Pinion Bearing Cup Installers
QT1823 1976-1996 SUV's, ½ ton with GM 8.5" 10 Bolt Axle
QT1818 1964-1981 SUV's, ½ ton with GM 8-7/8" Axle
QT1805 1967-72 ½ ton, ¾ ton with Dana 60
QT1816 1981-up ½ ton, ¾ ton, 1 ton with GM 14 Bolt 9.5" Axle
QT1805 1973-1988 ¾, 1 Ton with GM 14 bolt 10.5" Ring Gear
QT1816 1988-up ¾, 1 Ton with GM 14 bolt 10.5" Ring Gear
QT1806 1973-1989 Dual Wheel 1 Ton Truck with Dana 70HD, 70B
QT1805 1973-1994 1 ton Van & Motor home with Dana 70HD, 70B
QT1805 1984-91.5 Dual Wheel G30 Van with Dana 70U

Outer Rear Axle Pinion Bearing Cup Installers
QT1820 1976-up  SUV's, ½ ton with GM 8.5" 10 Bolt Axle
QT1820 1964-1981 SUV's, ½ ton with GM 8-7/8" Axle
QT1812 1967-72 ½ ton, ¾ ton with Dana 60
QT1815 1981-up ½ ton, ¾ ton, 1 ton with GM 14 Bolt 9.5" Axle
QT1823 1973-up ¾, 1 Ton with GM 14 bolt 10.5" Ring Gear
QT1812 1973-1994  all 1 Ton with Dana 70, 70B, 70HD
QT1823 1992-up P-Truck, GMT455 with Dana 80

NP205 Transfer Case Idler Gear Cup Installer
QT1818 1967-1991 All with 205

Transmission Bearing Cup Installers
QT1823 1993-2006 NV4500 Input
QT1802 1993-2006 NV4500 Countershaft Front
 

QT1100 8" Handle

Installer Driver Handles  For use with a variety of QuadTool™  Seal and Bearing Installers.  Made in U.S.A.. Order Driver Handles from our 4x4 Tools Page  Also available fro 4x4tools.com

QT1100 8" Handle for general purpose use 

QT1101 14"  Handle for axles & transmissions
 

Front Spindle Nut Socket fits 1982-1991 K30/3500, V3500 1 Ton 4x4 trucks with the Dana 60 front axle and 4 slot spindle nuts.  ½" drive.  Made in U.S.A. Order the QT1018  from our 4x4 Tools Page

QT1018 Dana 60 Front Spindle Nut Socket for 1982-91 GM 1 Tons

Universal Front and Rear Spindle Nut Socket  fits all 1969-1991 front spindle nuts on Blazer, Jimmy, ½ & ¾ ton Suburbans & trucks with either the Dana 44 or GM 10 bolt solid front axles including those with automatic hubs and hi-torque spindle nuts.  Also fits 1977-81 K30 with 6 slot front spindle nuts.  Rear applications include 1973-current ¾ and 1 ton models with full float rear axles. 1/2" drive socket has 4 internal lugs and 6 external lugs.  Made in U.S.A.  Order the QT1025  from our 4x4 Tools Page

QT1025 Universal spindle Nut Socket

QT9302 5 lb. Slide Hammer

Slide Hammer  A necessity to remove many bearings and seals when servicing axles, transmissions, and transfer cases.  5/8" SAE thread fits all QuadTool™ and most competitive pullers.  5# hammer with 23" long shaft.  Made in U.S.A. Order Slide Hammers from our 4x4 Tools Page.

QT9302 5 pound Slide Hammer

QT9303 10 Pound Slide Hammer For those really stubborn pulling jobs! 

Front Spindle Puller Attachment

Spindle Pullers  Use with the QT9302 (5 lb.) or QT9303 (10 lb.) slide hammers to quickly and easily remove those rusted in front wheel bearing spindles on your GM full size 4x4 without damage!  Essential for servicing axle u-joints, ball joints, spindle bearings, inner axle seals, and differentials.  Fits Chevy Blazer, GMC Jimmy & GM ½-1 ton models with solid front drive axles 1958 to 1991.  Made in U.S.A. Order the QT1023 from our 4x4 Tools Page.

QT1023 Spindle Puller Attachment for all Chevy & GM front axles

QT1039 Puller

QT1072 Our Best
Front Hub Puller!

QT1075 Ball Joint Socket

Ball Joint Socket removes and installs the threaded upper ball joint adjusting sleeve on most solid axle SUV'S, ½ ton, & ¾ ton trucks from 1969-1989 with Dana 30, 44, and GM 10 bolt open knuckle solid drive axles.  Professional duty ½" drive socket attaches directly to ratchet.  Much stronger & easier to use than the hex sockets sold at parts stores.  Not for impact use!  Made in U.S.A. Order the QT1075 from our 4x4 Tools Page.

QT1075 Upper Ball Joint Adjusting Sleeve Socket

Available Soon

Inner Pinion Bearing Installer

Inner Pinion Bearing Installers  Quickly and easily install inner pinion bearings without damaging the bearing or pinion.  Use with a press ao hammer. Made in U.S.A.  Order Pinion Bearing Installers from our 4x4 Tools Page.

QT1003  3/4 and 1 Ton 1973-1994 Rear Dana Model 70, 70HD,   Rear GM14 Bolt 10.5" ring gear 1973-up.

QT1043 1992-up 3500, 3500HD, motorhome with Dana 80 rear axle and dual rear wheels.

QT1043 Dana Model 60 1967-1991 (Rear),  K30,35, V3500 Front 1977-9,   GM 10 Bolt Rear to 1998,  and GM 10 bolt Front axles 1978-1989.

QT1044 1960-1980 Dana 44 front axles in Blazer, Jimmy, K10, K15, K20, K25 models.

QT1074 1981-1999 3/4 ton rear with GM 9.5", 14 Bolt Rear Axle.

Step Plates are used when pulling and/or installing your differential bearings.  These plates fit in the axle shaft hole of your differential. Use as a push plate for bearing removal or to support the differential when pressing on new bearings.  Made in U.S.A. Order Press Step Plates from our 4x4 Tools Page.

QT1034 fits Dana Model 60-70 & GM 14 bolt 

T1165
Axle Shaft Seal Installer

Front Axle Inner Axle Seal Installers make installing those hard to reach front inner axle shaft seals easy without damaging the seal!  Very versatile. Can be used with slide hammers, pulling screws, driver handles, or hammers.  Designed specifically for use with original equipment type inner axle seals as sold by us.  May not work with competitive brands of seals.  Made in U.S.A.  To order any of the installers listed below, please see our Front Axle Shaft Seal Tools Webpage.

K5 Blazer, Jimmy w/Model 44 Axle: 1978-1980 K20, K25: 1970 K10/15, K20/25 w/Model 44 Axle: 1978-1980	T1029 or T1084
K5 Blazer, Jimmy w/Model 44 Axle: 1973-1977 K10/K15: w/Model 44 Axle: 1973-1977 K20/25: w/Model 44 Axle: 1972-1977	T1041 or T1165
K30, K35, K3500, V3500: 1977-1991 Military CUCV: 1984-1988	T1042 or T1156
Blazer, Jimmy, Suburban with GM 10 Bolt: 1977-1991 K10/15/1500, V1500 with GM 10 Bolt: 1977-1987 K20/25/2500, V2500 with GM 10 Bolt: 1977-1987	T1165
Call us for Installers for other Chevy and GMC applications

NP205 Transfer Case Dummy Shaft is required to hold the idler shaft bearings, shims, and sleeve together when removing or installing the idler shaft on  New Process 200, 201, and 205 transfer cases.  Made in U.S.A.  Order  QT2013 from our 4x4 Tools Page.

QT2013 NP205 Dummy Idler Shaft

Clutch Alignment Tools

Clutch Alignment Tools are an essential aid when installing a clutch to center the clutch hub to the pilot bearing.  Standard duty plastic installers are the same as included in our clutch kits.  Solid steel, professional duty installers are the best choice for the heavy clutches typically found on diesel and V10 powered pickups.  Standard duty installers are Made in U.S.A.  Pro duty installers are Made in U.S.A. from either domestic or imported steel.

QT3014 fits almost all Chevy and GMC light trucks from 1958-1999. All have 1-1/8" 10 spline clutch hubs and pilot bearings/bushings with .592" bore except for some 1978 models with 400ci V8's that had 1-3/16" inputs

QT3014 GM Plastic 1-1/8"-10 spline Clutch Alignment Tool $7.50