QUAD 4 x4 Your 4x4 Experts!
23 Turner Rd., Roberts, Montana 59070
 CALL  406-446-2427 • Order 24 hours a day.  7 days a week.

DANA-SPICER DIFFERENTIAL AND AXLE PARTS FOR DODGE 

Restore safety and dependability to your Dodge with these top quality QuadKits™!  These comprehensive kits include the parts, tools, chemicals, and instructions to do a pro-quality job!  Need it in a hurry?  Expedited air shipment is available at extra cost.  Call 406-446-2427 for details. 

Pinion Yoke Kit

Pinion Yoke Kits  Each Kit includes new pinion yoke, pinion seal, pinion nut, pinion washer, u-joint retaining hardware,  Threadlocker, and instructions.  Made in U.S.A. 
 

QK4653 Model 60 1993-'99 with Cummins & V10 Includes slinger.....$99.95
QK4658 Model 60  2000-02 All 2500, 3500 (Does not include slinger, you must reuse original slinger)....$174.95
QK4657 Mod 44 W150-250 1971-93 includes slinger and conversion u-joint $109.95

Dana Front Axle Models Used in Dodge Trucks to the 2002 Model Year

Diff Bearing & Shim Kit
 

Front Axle Applications:

All W100/W150: Dana 44
All 1500 1994-2001: Dana 44

Differential Kits  We stock a complete array of genuine Dana-Spicer differential components from shims to complete ring & pinion kits.   In the future, a complete new page will be devoted to differential components. For pricing and to order, go to our  Dana Axle Parts Page
 

QK4606 Dana 60 Differential Bearing Kit with shims
QU40183 Dana 60 Inner Pinion Bearing Kit...$37.95
QU40182 Dana 60 Outer Pinion Bearing Kit...$37.95
QU40207 Dana 60 Complete Shim Kit w/pinion nut & washer..$52.97
QU40179 Dana 44 Outer Pinion Bearing Kit...$19.95
QU40180 Dana 44 Inner Pinion Bearing Kit...$24.97
QK4605 Dana 44 Differential Bearing Kit with shims...$
QU40197 Dana 44 Diff Parts Kit includes pinion mate gears with thrust washers, side gears with thrust washers, cross shaft, cross shaft lock pin, & ring gear bolts 1985-1994.......$
QU40177 Dana 44 4.10 Ring & Pinion Kit includes gear set, shims, pinion bearings, pinion nut, pinion washer, seal, ring gear bolts..$299

Inner Axle Seal Kits Whenever you remove the front axle shafts, inspect the shafts and axle tubes for any signs of differential fluid leakage.  It's a lot cheaper and easier to replace the seals than rebuilding your diff after it blows up due to oil starvation!  Differential removal is required for most seals except the disconnect side on vacuum shift axles.  These are tricky seals to install, but you can do it with one of these kits!  A differential case spreader is definitely recommended but not absolutely required for differential removal/installation. We also find a dead-blow sledge essential to reinstall the differential. Extra seals, differential cover gaskets, and RTV sealant are available separately.  Call us for information on additional tools required to disassemble the axle.

QK4620 Axle Seal Kit

Go to the Front Axle Page for Your Year:
1970-1993 Dodge Front Axle Page
1994-2002 Front Axle and Steering Page

5 pound Dead-Blow Hammer is one of the handiest tools you will ever own for working on your Dodge 4x4 truck.  Indispensable any time a part needs a little persuasion.  Plastic face will not ding or damage critical components such as differentials.  You might be able to wear one of these out, but in 30 years of professional service work, Dan the Gear Man  has yet to wear his out!
To Order, go to the 4x4 Tools Page  Made in U.S.A.

Use to relieve bearing preload on your Dana Front and Rear Axles and C205F Corporate Axles.  1994-2002 Dodge applications include:

1994-2002 All 1500, 2500, 3500 Front Drive Axles (Dana 44, 60)
1994-2002 All 2500 and 3500 Rear Drive Axles (Dana 60, 70, 80)

Also use on many other Dodge, Jeep, Ford, GM, and International applications from 1941 to current.

To Order, go to the 4x4 Tools Page  Made in U.S.A.

 Central Axle Disconnect (CAD) Parts and Kits for your 1994-2001 Dodge 4x4 Ram front axle.

Go to the 1994-02 Front Axle and Steering Page