 |
|---|
| For over 30 Years, Our Commitment to You: First Class Quality, In Stock Availability, The Right Part...the First Time! plus...Montana is a Sales Tax Free State, We NEVER Charge YOU SALES TAX!!! FREE SHIPPING! with $300 Order On FedEx Ground Shipments to the Continental United States NEW NAME! QUAD 4x4 is now Torque King 4x4....and New Products! |
| Link to Our Online Webstore | Link to Our Large Text Catalog Home Page Link to Index for All Our Web Pages (at Bottom of This Page) |
|---|
Parts for Borg Warner 4407 Transfer Cases in
1996-1997 Ford F-250 and F-350 Trucks
1996-1997 Ford F-250 and F-350 Trucks
Page is under construction!
The Borg Warner 4407 Transfer Case is a mechanical shift, chain driven unit with a plantary type low range reduction. Ford used the BW4407 for only the 1996 and 1997 model years in F250 and F350 4x4 trucks. The BW1356 was available with and without Power Take Off (PTO) drive capabilities.
| Miscellaneous | ||||
|---|---|---|---|---|
 |
TK20255 Torque King® Ford 6 Bolt Transmission to Transfer Case Gasket is a genuine, premium quality, original equipment, heavy gauge paper gasket that fits between your 1996 to 1997 F250 or F350 transmission and transfer case. TK20255 fits all Ford Ford F-250 and F350 4x4 trucks with Borg Warner 4407 Transfer Cases from 1996 to 1997. |  |
||
 |
QU10104 Vent and Hose Assembly. The plastic vent itself will fit any 5/16" hose and is commonly used as an axle vent breather. Made in U.S.A. | |
||
 |
QU11092 Right Angle Transfercase Vent Fitting | |
||
 |
||||
| Output Yokes | ||||
|---|---|---|---|---|
 |
QU20038 1356 CV Output Yoke for BW1356 or rear output CV yoke for 1978-1997 Ford F-Series with Borg Warner 1356 Transfercase and constant velocity drveshaft. | |
||
|
||||
| Seals, Individual | ||||
|---|---|---|---|---|
 |
QU50089 Slip Yoke Rear Output Seal for 1987-97 BW1356 and 1995-1997 Ford F250, F350 Borg Warner 4406, 4407 transfer case. | |
||
|
||||
| Small Parts | ||||
|---|---|---|---|---|
 |
QU20019 Rear Output Bearing to Output Shaft Snap Ring for Ford Borg Warner BW1356 (1987-1997) and BW4407 (1996-1997). | |
||
|
||||
| Product Title 15 | ||
|---|---|---|
| Product Title 16 | ||
|---|---|---|
| Product Title 17 | ||
|---|---|---|
| Product Title 18 | ||
|---|---|---|
| Product Title 19 | ||
|---|---|---|
| Product Title 20 | ||
|---|---|---|
| Product Title 21 | ||
|---|---|---|
| Product Title 22 | ||
|---|---|---|
| Product Title 23 | ||
|---|---|---|
| Product Title 24 | ||
|---|---|---|
Content for id "notes" Goes Here
Content for id "montanalore" Goes Here
DODGE Links to Our Parts Web Pages for Dodge Trucks and 4x4's |
|||||
|---|---|---|---|---|---|
| Axles, Front | Axle, Rear | Driveshafts | Engine and General Interest |
Transfer Case | Transmission |
| Axle, Front AAM 925 2003-up |
AAM 1050 10-1/2" Full Float Rear Axle 2003-up Ram 2500 | 1974-1975.5 Dodge Spicer Type Front CV Driveshaft | 1989-1993 Cummins Diesel Clutch and Engine Parts | Transmission,
Dodge General |
|
| Dodge Dana 44 Standard Duty Small Closed Knuckle has 8 Bolt Ball Seal 1957-1971 | AAM 1150 11-1/2" Full Float Rear Axle 2003-up Ram 2500, Ram 3500 | Dodge Full Size Front Saginaw Type CV Driveshaft 1975.5 to 1993 | 1994-on Cummins Diesel Clutch and Engine Parts | New Process NP200 and NP201 |
4 Speed to 1993 |
| Dodge Dana 44 Heavy Duty Large Closed Knuckle has 12 Bolt Ball Seal 1963-1971 | 8.25" Chyrsler Rear Axle for Dakota, Durango, Van, D100 | 1987-2001 Dodge Dakota and 1998-1999 Dodge Durango Front CV Driveshaft Parts | Clutch Parts for Dodge Gasoline Engine Trucks | 1974-1979 New Process Full Time NP203D Parts | 5 Speed 1989-1993 Getrag G360 |
| Dodge Dana 44 Open Knuckle 1972-1975 | 8.75" Chyrsler Remove able Carrier Rear Axle Yoke | Driveshaft, Front Ram 1500 1994-2001 |
New Process NP205 Parts |
5 Speed 1993-2004 NV4500 |
|
| Dodge Dana 44 Live Spindle 1974-1979 | Axle Rear, 9.25" Chyrsler | Driveshaft, Front Ram 2500, 3500 1994-2002 |
New Process NP208D Parts 1980-1987 | 5 Speed NV4500 Kits |
|
| Dodge Dana 44 Open Knuckle 1980-1984 | Dodge Dana 60 Rear Axle 1959-1971 | Driveshaft, Front Ram 2500, 3500 2003-2011 | New Process NP231D Parts | 5 Speed NV4500 Parts |
|
| Dodge Dana 44 CAD 1985-1993 | Dodge Dana 60 Rear Axle 1972-1979 | Front CV Driveshaft 2008-up Ram 4500, Ram 5500 | 5 Speed NV4500 Small Parts |
||
| Dodge Dana 44 Ram 1500 1994-2001 |
Dodge Dana 60 Rear Axle 1980-1993 | Dodge 1961-1993 Gas Rear Driveshaft | New Process NP241D Parts 1987-1993 | Transmission, 5 Spd NV4500 Tools |
|
| Dodge Dana 44 Ram 2500 1994-1997 |
Dodge Dana 60 1994-2002 |
Dodge 1989-1993 Diesel Rear Driveshaft | New Process NP241DHD Parts 1994-1997 |
||
| Dodge Dana 60, 61 1975-1993 |
Dodge Dana 70, 70HD 1957-1971 | Driveshaft, Rear Dodge 1994-2002 |
New Process NP241DHD Parts 1998-2002 |
6 Spd
G56 2005-up 2005-up |
|
| Dodge Dana 60 Ram 2500-3500 1994-1997 |
Dodge Dana 70, 70HD 1972-1984.5 |
Driveshaft, Rear Ram 2500, Ram 3500 2003-2011 |
New Process NP241DLD Parts 1994-1997 |
||
| Dodge Dana 60 Ram 2500-3500 1998-1999 |
Dodge Dana 70 1984.5-1993 |
New Process NP241DLD Parts 1998-2002 |
6 Speed NV5600 Parts |
||
| Dodge Dana 60 Ram 2500-3500 2000-2002 |
Dodge Dana 70 1994-2002 |
New Process NP241D Parts 2002-up | |||
| Dodge Dana 70 Closed Knuckle 1958-1978 | Dodge Dana 80 Rear Axle 1994-2002 |
New Process |
|||
| Dodge Dana 111 2008-up |
New Process NP/NV273D Parts 2003-up | ||||
| Rockwell T223 W600 1974-1978 |
|||||
| Please keep in mind not all web links are live, as we are still in the process of updating our web pages. | |||||
| Quad 4x4 Home Page | |||||
FORD Links to Our Parts Web Pages for Ford Trucks and 4x4's |
|||||
|---|---|---|---|---|---|
| Axles, Front | Axle, Rear | Driveshafts | Engine and General Interest |
Transfer Case | Transmission |
| Dana 28 IFS Dana 35 IFS Ranger, Bronco II, Explorer |
Ford Corporate Rear Axles 8.8" and Smaller | Front CV Driveshaft 1970-1979 Bronco and F-Series | Transmission Ford General |
||
| Dana 30 Bronco Open Knuckle King Pin Type 1966-1971 | Corporate Ford 9" | Front Driveshaft 1980-1997 Bronco, F150, F250 | Tools, Specific for Ford | 4 Speed |
|
| Ford Dana 44 Standard Duty Small Closed Knuckle has 8 Bolt Ball Seal 1959-1975 | Corporate Ford 9.75" |
Front CV Driveshaft Ford F-350 1985-1997 | Borg Warner 1345 |
4 Speed |
|
| Ford Dana 44 Heavy Duty Large Closed Knuckle-has 12 Bolt Ball Seal 1961-1975 | Dana-Spicer 60 1954-1972 |
Front CV Driveshaft Excursion and 1999-2014 Super Duty | Borg Warner 1350/1354 |
Transmission, 5 Spd Light Duty | |
| Ford Dana 44 Bronco, F100, F-150 Open Knuckle 1966-1979 | Dana-Spicer 60 1973-1979 |
Engine Parts, Diesel or Gas |
F-Seies to 1996 Borg Warner 1356 |
1988-2004 ZF S5-45, S5-47 5 Speed Manual |
|
| Ford Dana 44 F-250 Open Knuckle with Ball Joints 1976-1979 | Dana-Spicer 60, 61 1980-2002 |
Rear Driveshaft 1969-1979 F-series | F250, F350 1996-1997 Borg Warner 4407 |
ZF 6spd | |
| Dana-Spicer 70 1961-1972 |
Rear CV Driveshaft 1973-1996 Bronco and F-150 |
Dana-Spicer Model 20 |
|||
| Ford Dana 44 IFS 1984-1996 | Dana-Spicer 70 1973-1979 |
Rear Driveshaft 1980-1997 F-Series non-CV | Dana-Spicer Model 21 |
||
| Ford Dana 50IFS 1980-1982 | Dana-Spicer 70, 70HD 1980-1985 |
Rear Driveshaft, Excursion and 1999-2004 Super Duty | Dana-Spicer Model 24 |
||
| Ford Dana 50 IFS 1983-1997 | Dana 80 Rear Axle 1988-1998 F350, F-450 1996-2000 E350, E450 |
1974-1979 New Process Full Time NP203 Parts | |||
| Dana 80 F350, F450 Dual Rear Wheel 1999-2010 | 1973-1979 New Process NP205 Parts |
||||
| Dana-Spicer 50 Super Duty 1999-2002 |
Dana-Spicer 110 F450/F550 2003-up | New Process NP208F Parts |
|||
| Ford Dana 60 Closed Knuckle 1974-1975 |
Dana-Spicer 135 |
Legacy Page Driveshaft, Front 1998 and prior |
Transfer Case, New Process 271F Excursion, 1999-2010 Super Duty | ||
| Ford Dana 60 King Pin Type 1976-1977 | Transfer Case, New Process 273F Excursion, 1999-2010 Super Duty | ||||
| Ford Dana 60 King Pin Type 1978-1979 | Sterling 10.5" Excursion F250, F350 SRW 1999-2010 | Rockwell T223 | |||
| Ford Dana 60 King Pin Type 1985-1991 | Ford Sterling 10.5" F250, F350 SRW 2011-up | ||||
| Ford Dana 60 Ball Joint Type 1992-1997 | |||||
| Ford Dana 60 Super Duty F250-F350 1999-2004 | |||||
| Ford Dana 60 Super Duty F450-F550 1999-2004 | |||||
| Ford Dana Super 60 Super Duty F250-F350 2005-2010 | |||||
| Ford Dana Super 60 Super Duty F450-F550 2005-2010 |
|||||
| Please keep in mind not all web links are live, as we are still in the process of updating our web pages. | |||||
| Quad 4x4 Home Page | |||||
GENERAL INTEREST Links to Our Web Pages for General Interest |
|||||
|---|---|---|---|---|---|
| Company Information |
Online Tech Articles A-M |
Online Tech Articles N-Z |
Other Web Sites | Parts | Parts and Supplies |
| Contact Us | Dana Rear Axle Component Failures | Tech Article Index Page |
Apparel, QUAD 4x4 Made in U.S.A. |
||
| Dodge 1994-2002 Front Axle PM |
TA: NV4500 Cast Iron Tail Housings | 4x4 Repair Manuals Home Page |
Shop Supplies | ||
| Getrag G360 to NV4500 Conversion |
NV4500 Tranmission Conversion Info |
4x4 Tools Home Page |
Hardware | ||
| Order and Tax Information |
NV4500 5th Gear Failures and Solutions |
Filter Kits for Transfer Cases and Manual Transmissions | Lubricants | ||
| NV4500 Transmission NV4500 FAQ |
New Process NP205 Transfer Case |
||||
| Causes of Manual Transmission Failures | |||||
| NV4500 Transmission, NV4500 Kits |
|||||
| NV4500 Transmission Large Parts |
|||||
| NV4500 Transmission Small Parts |
|||||
| Please keep in mind not all web links are live, as we are still in the process of updating our web pages. | |||||
| Quad 4x4 Home Page | |||||
INTERNATIONAL AND JEEP Links to Our Parts Web Pages for IHC and Jeep 4x4's |
|||||
|---|---|---|---|---|---|
| Axles, Front | Axle, Rear | Driveshafts | Engine and General Interest |
Transfer Case | Transmission |
| Dana-Spicer 25, 27 Closed Knuckle IHC 1961-1966 Jeep 1941-1971 |
AMC 20 Jeep 1976-1985 |
Jeep Greaseable Front CV Driveshaft | |||
| Dana-Spicer 30 Closed Knuckle IHC 1967-1971 Jeep 1971-1973 |
Dana-Spicer 25, 27 Jeep 1941-1971 |
Jeep NonGreaseable Front CV Driveshaft | Transfer Case, Jeep |
||
| Dana-Spicer 30 Open Knuckle IHC Scout 1971.5-1975 | Dana-Spicer 30 Jeep 1967-1968 |
Transfer Case, IHC and Jeep Dana 18 |
|||
| Jeep CJ Dana 30 Open Knuckle 1972-1986 | Jeep Dana 35 1985-up |
Transfer Case, IHC and Jeep Dana 20 |
|||
| Dana-Spicer 30 XJ, YJ with Vacuum CAD 1984-1996 | Dana-Spicer 44 IHC 1950-1979 |
Transfer Case, Jeep Dana 300 |
|||
| Dana-Spicer 30 All w/o CAD 1985-up | Jeep Dana 44 Rear Axle 1957-1971 | New Process NP200 and NP201 | |||
| Dana-Spicer Super 30 1999-up |
Jeep Dana 44 Rear Axle 1972-1979 | Transfer Case, IHC NP205 |
|||
| IHC Dana 44 Closed Knuckle 1953-1975 | Jeep Dana 44 Rear Axle 1980-1991 | Transfer Case, Jeep NP208 Parts |
|||
| IHC Dana 44HD Closed Knuckle 1957-1972 | Jeep Dana 44 Rear Axle 1992-2010 | Transfer Case, Jeep NP231J |
|||
| IHC Dana 44 Open Knuckle 1971-1980 | Dana-Spicer Super 44 WJ 1999-up |
Transfer Case Jeep, Other New Process |
|||
| Jeep Dana 44 Closed Knuckle 1957-1973 | Jeep Dana Spicer 53 Semi-Float Rear Axle 1957-1971 | ||||
| Jeep Dana 44 Open Knuckle 1974-1991 |
Jeep Dana-Spicer 60 Full Float Rear Axle 1968-1988 | ||||
| Jeep 2003-up TJ & Rubicon Dana 44 | IHC Dana 60 Rear Axle | ||||
| Dana-Spicer 60 IHC 1300 1975 | IHC 1968-1975 Rear Dana 70 |
||||
| Jeep Dana 60 Closed Knuckle M715, M725 1967-1969 |
Jeep Dana 70 Rear Axle 1957-1969 | ||||
| IHC Dana 70 Closed Knuckle 1961-1982 | |||||
| Please keep in mind not all web links are live, as we are still in the process of updating our web pages. | |||||
| Quad 4x4 Home Page | |||||
MANUALS and VIDEOS Links to Our Web Pages for Repair Manuals, Tech Service Bulletins, and Videos |
|||||
|---|---|---|---|---|---|
| Component Specific Appliction |
Chevy/GMC | Dodge | Ford | IHC/Jeep | Universal |
| New Process NP205 Transfer Case | 1973-1991 Chevy and GMC |
Excursion and 1999-2004 Super Duty | Manuals Home Page | ||
| New Venture NV4500 5 Spd Transmission | 1988-up Chevy and GMC |
Driveshafts | |||
| Please keep in mind not all web links are live, as we are still in the process of updating our web pages. | |||||
| Quad 4x4 Home Page | |||||
TOOLS Links to Our Web Pages for Tools |
|||||
|---|---|---|---|---|---|
| Tools by Tool Application A-F |
Tools by Tool Application G-M |
Tools by Tool Application N-S |
Tools by Tool Application T-Z |
Tools Universal Application |
Tools, by Vehicle Make |
| Ball Joint Tools | Tools for New Venture NV4500 Manual Transmissions | 4x4 Tools Home Page |
|||
| Bearing Cup Installers | U-Joint Tools | ||||
| Tools, Specific for Ford | |||||
| Front Axle Shaft Seal Installation Tools | |||||
| Please keep in mind not all web links are live, as we are still in the process of updating our web pages. | |||||
| Quad 4x4 Home Page | |||||
Copyright 2003-2013 4x4 Tech Inc. All rights reserved
Last Global Update: May 30, 2013
Last Global Update: May 30, 2013